How to watch IPTV on Enigma 2 Decoders?

Satellite Receivers Support Center
Post Reply
User avatar
Posts: 37
Joined: 16 Mar 2019, 02:07

29 Mar 2019, 23:59

How to watch IPTV on Enigma 2 Decoders?

[sourcecode language=”html”] [/sourcecode]

Here are the simple steps to follow:

We need a script (the script would be the link that the provider iptv should give you) to insert via the TELNET function ( PuTTY )
IP address of the decoder
Access data for the Telnet function, then login and password of the mounted firmware
Enigma autoscript data
For example like this below
wget -O /etc/enigma2/i* "http://nomeserver:porta/get.php?username=USERNAME&password=PASSWORD&type=enigma22_script&output=mpegts" && chmod 777 /etc/enigma2/i* && /etc/enigma2/i*
Let's see in detail how to insert and have the list we need.
Contact the IPTV service provider and get the autoscript code (usually the one for Enigma 2.0)

Open PuTTY
Enter the IP address of the decoder in the Host Name section
We select Telnet in connection type
Press on open button (Once connected)
We insert the Login (usually root) and the Password (defined by the type of firmware or who has changed it)
Once connected we paste the script string, give enter from the keyboard if the installation process does not start automatically.
Now you will have your list in the channel bouquet
Post Reply